Status: [ ] submitted work method, [ ] proposed treatment standard, [x] final treatment standard
Author: David Gibney
Contributors: John Leeke
Title of Treatment: Rebuild Sash Joint by Splicing
Class of Treatment: [ ] Maintain, [ ] Stabilize, [x ] Repair, [ ] Upgrade, [ ] Exception
Type of Treatment: [ ] Traditional, [x] Contemporary, [ ] Conservation
Condition to be Treated:
A mortise and tenon joint has completely failed allowing significant movement between the stile and rail.
Replace the deteriorated ends of the stile and rail with new wood that is spliced on and shaped to exactly match the original details of the joint. This treatment is suitable when the joinery, the mortise or tenons has completed failed, by fungal decay or physical breaking. This method saves much of the original fabric without having to make entire replacement parts.
1. Disassemble the sash to remove the rail and style that has the failing joint from the sash.
2. At the failed tenon, cut a slot in the end of the style or rail the same thickness of the original tenon and to a depth of 1 1/2".
3. Shape a piece of wood to form the new tenon, the same thickness as the old tenon and long enough to fill the new slot and extend through the mortise.
4. Glue the new tenon into the slot and clamp. Allow glue to cure thoroughly.
5. Trim the new tenon into the original mortise for a snug or tight fit.
6. Cut the bottom off of the style at the failed mortise with a 45 degree angle sloping downward to the outside of the stile, to form a scarf.
7. Shape a piece of wood to match the original style in all dimensions and profiles, including an angled scarf to match the scarf on the stile. Make a wooden spline 1/8" thick by 1" wide and cut slots angles in the center of the style for reinforcement of the joint.
8. Glue the scarf joint together, assure alignment of the new piece with the stile. Allow glue to cure thoroughly.
9. Cut a new mortise in the new end of the stile, following the other stile as a model to the exact dimensions and shape.
10. Re-assemble the sash and pin or peg the mortise and tenon joints.
• Wood for the replacement parts; match species, grade, anual growth ring count and orientation
• adhesive glue
Quality of Results
Best Work: The joinery is tight showing no movement if the stile and rail are twisted. The spice joint is unnoticeable after the style has been painted.
Inadequate Work: Using dowels or screws and not re-creating the mortise and tenon joint
Wood repairs for sashes, frames and sills.
2 posts • Page 1 of 1
- Posts: 374
- Joined: April 13th, 2011, 7:34 pm
- Full Name: John Leeke
- Location: Portland
- Organization: Historic HomeWorks
- Permissions: Yes
- Location: Portland, Maine
Who is online
Users browsing this forum: No registered users and 1 guest