Page 15

Post your comments and notes on the Summit Draft right here.
johnleeke
Posts: 375
Joined: April 13th, 2011, 7:34 pm
Full Name: John Leeke
Location: Portland
Organization: Historic HomeWorks
Permissions: Yes
Location: Portland, Maine
Contact:

Page 15

Postby johnleeke » August 2nd, 2011, 5:53 pm

Click "Post Reply" to enter your notes.

jlindtner
Posts: 19
Joined: June 20th, 2011, 12:59 am
Full Name: John Lindtner
Location: West Grove, PA
Organization: BPS, LLC
Permissions: Yes

Re: Page 15

Postby jlindtner » August 13th, 2011, 12:23 pm

@Typical Procedure:
@#4
an alternative to taping the glazing bar is using a 22 gauge pin nailer. With the quality exterior wood glue on the back of the glazing bar, 2 or 3 pins per munin (6/6 sash) should be enough.

Patrick Roach
Posts: 12
Joined: August 3rd, 2011, 10:26 am
Full Name: Patrick M. Roach AIA
Location: Ann Arbor, MI
Organization: Quinn Evans
Permissions: Yes

Page 15

Postby Patrick Roach » August 16th, 2011, 10:24 am

I suggest that the document be subdivided at this location.

Material and product specifications, standards for quality and performance, defniitions and the like form a technical specification, while the treatments and methodologies which start on Page 15 are more of a technical manual. I don't think there's anything wrong with having them in a single document, but it's a pretty clear change in purpose, and it would be helpful for the reader if these were treated as separate sections.


Return to “Summit Draft Comments”

Who is online

Users browsing this forum: No registered users and 1 guest