Page 21

Post your comments and notes on the Summit Draft right here.
johnleeke
Posts: 375
Joined: April 13th, 2011, 7:34 pm
Full Name: John Leeke
Location: Portland
Organization: Historic HomeWorks
Permissions: Yes
Location: Portland, Maine
Contact:

Page 21

Postby johnleeke » August 2nd, 2011, 5:55 pm

Click "Post Reply" to enter your notes.

jlindtner
Posts: 19
Joined: June 20th, 2011, 12:59 am
Full Name: John Lindtner
Location: West Grove, PA
Organization: BPS, LLC
Permissions: Yes

Re: Page 21

Postby jlindtner » August 13th, 2011, 12:41 pm

@Typical Procedure:
Add 0. Pretreat glazing rabbet with 50/50 mix of penetrol/mineral spirits if necessary
@6. Depending on the putty an oil based primer may not be required. (Sarco does not recommend oil primer)

jlindtner
Posts: 19
Joined: June 20th, 2011, 12:59 am
Full Name: John Lindtner
Location: West Grove, PA
Organization: BPS, LLC
Permissions: Yes

Re: Page 21

Postby jlindtner » August 13th, 2011, 8:43 pm

@ Typical Procedure
@#2. Using caulk to bed the glass allows for less or no glazing points to help secure the glass.


Return to “Summit Draft Comments”

Who is online

Users browsing this forum: No registered users and 1 guest