Page 14

Post your comments and notes on the Summit Draft right here.
johnleeke
Posts: 375
Joined: April 13th, 2011, 7:34 pm
Full Name: John Leeke
Location: Portland
Organization: Historic HomeWorks
Permissions: Yes
Location: Portland, Maine
Contact:

Page 14

Postby johnleeke » August 2nd, 2011, 5:53 pm

Click "Post Reply" to enter your notes.

jlindtner
Posts: 19
Joined: June 20th, 2011, 12:59 am
Full Name: John Lindtner
Location: West Grove, PA
Organization: BPS, LLC
Permissions: Yes

Re: Page 14

Postby jlindtner » August 13th, 2011, 12:19 pm

@ Dutchman
@"tight bond 3"
substitute with "quality exterior wood glue"

Patrick Roach
Posts: 12
Joined: August 3rd, 2011, 10:26 am
Full Name: Patrick M. Roach AIA
Location: Ann Arbor, MI
Organization: Quinn Evans
Permissions: Yes

Page 14

Postby Patrick Roach » August 16th, 2011, 10:14 am

@Dutchman:

This term needs to be defined.

Regarding adhesives, the Titebond website indicates some performance and material specifications for their product which may be helpful in developing a non-proprietary spec. These include:
-Aliphatic Resin, as a material specification for the product.
-Meets or exceeds ANSI/HPVA, Type I specification for weather resistance (need to research this spec further to find out what that really means).
-4000 psi strength (doesn't say whether this is tension or shear).

barnlover
Posts: 16
Joined: June 15th, 2011, 12:57 pm
Full Name: Joy Sears
Location: Salem, OR
Organization: OR SHPO
Permissions: Yes

Re: Page 14

Postby barnlover » September 1st, 2011, 2:08 am

Are you going to talk about 2 part epoxy repairs here? Liquid or putty


Return to “Summit Draft Comments”

Who is online

Users browsing this forum: No registered users and 1 guest